01 52 06 530 email@example.com
The S-100 & S-200 Label SlittersHere’s the most convenient solution for slitting and rewinding narrow labels. LABELMATE Label Slitters allow you to print small labels several across and then slit them to the desired width. This multiplies your print efficiency by a factor equal to the number of labels across, and dramatically increases your print head life and ribbon usage efficiency.
The rugged LABELMATE S-100 and S-200 are High-Speed, Heavy-Duty Label Slitters identical in construction except for size.The Slitters can be used either “in-line” or “off-line”. In “in-line” use, the Slitter is placed between the printer output and the Label Rewinder. The slitting speed is determined by the printer output speed. In “off-line” use, the Slitter is placed between a UCAT Unwinder and a CAT-3 Rewinder. Off-line slitting is recommended for production work or for use with three or more blades.
With slitting speeds up to 125cm/sec in “off-line” mode, you’ll make fast work of your slitting jobs.An optional six- (6) digit PC-1 Pre-set Counter allows you to pre-set the number of labels to be slit. When the counter reaches the preset number, it sends a “HALT” signal to the Rewinder. Power to the Rewinder motor is then shut off and braking is applied.
You’ll have no annoying label spills to contend with.The S-100-SP Self-Powered Label SlitterThe S-100-SP Self-powered Label Slitter simplifies label slitting by providing powered pinch rollers to pull the labels through the cutting blades rather than having to rely on a Label Rewinder to pull the labels. This results in a constant cutting speed and means you can use any LABELMATE Rewinder equipped with a “Quick-Chuck” to do your rewinding.
You adjust the slitting speed right on the S-100-SP. Because the S-100-SP is self-powered, you can reliably use more cutting blades than on a Slitter that is powered by a Rewinder. You can add additional BH-1 Blade Holders for a total of five across the maximum label width of 175-mm. The new S-100-SP is a great choice for you label needs.
The easily replaced slitting blades are click-adjustable, maximizing their useful life. Special, very sharp, ground steel blades are supplied with the S-100, S-200 and S-100-SP and are recommended for replacement. No tools are required for blade adjustment or replacement. During slitting, the blades are stabilized with LABELMATE’s proprietary system, giving a clean cut at all speeds. Rugged, heavy-gauge welded steel construction and precision parts yield a product of the highest quality.
The S-100, S-200 & S-100-SP feature a 3-Year Parts and Labour Limited Warranty, the longest in the industry. (The Warranty Period for included Power Supplies is 1-Year).
For additional support and questions regarding our products and services, please contact us